Lake Magdalene Cabinet Refacing logoLake Magdalene Cabinet RefacingLake Magdalene, FL
Menu
hardware & soft-close upgrades in Lake Magdalene, FL

Lake Magdalene Cabinet Refacing

Hardware & Soft-Close Upgrades in Lake Magdalene, FL

Soft-close hinges and new cabinet hardware in Lake Magdalene, FL. Quiet operation, updated pulls, free estimates on install.

  • 15+ Years local experience
  • 500+ Projects completed
  • Licensed & Insured

Serving Lake Magdalene and nearby communities.

Original hinges on a lot of Lake Magdalene's older oak kitchens still run the bang-and-slam hardware from when the house was built, decades before soft-close became standard. This service swaps worn hinges and pulls for soft-close hinges and slides, plus new knob and pull styles, either as a standalone job or bundled into a larger refacing project.

Lake Magdalene Cabinet Refacing handles the swap on existing boxes without touching the doors themselves unless you want new pulls that need different hole spacing.

What's included

What's Included with Hardware & Soft-Close Upgrades

Typically included: removal of old hinges, pulls, and knobs; installation of soft-close hinges and drawer slides; mounting of new pulls or knobs on existing or new holes; function testing on every door and drawer.

Optional: drawer organizer inserts, hinge mounting plate replacement on worn or stripped boxes, matching hardware finish across a full kitchen or just one problem cabinet run.

Customer prep: clear out cabinet and drawer contents in the work zone before the crew arrives so hinges and slides can be accessed without delay.

How it works

How Our Hardware & Soft-Close Upgrades Process Works

  1. Hardware Assessment photo
    Step 1

    Hardware Assessment

    Existing hinges and pulls are checked for hole spacing and mount compatibility.

  2. Style Selection photo
    Step 2

    Style Selection

    Homeowners pick knob, pull, and hinge styles from samples on site.

  3. Old Hardware Removal photo
    Step 3

    Old Hardware Removal

    Outdated hinges, slides, and pulls come off doors and drawers.

  4. Soft-Close Mechanism Install photo
    Step 4

    Soft-Close Mechanism Install

    Soft-close hinges and drawer slides go in for quieter daily use.

  5. New Hardware Fitting photo
    Step 5

    New Hardware Fitting

    Selected pulls and knobs are attached and adjusted for proper fit.

  6. Function Testing photo
    Step 6

    Function Testing

    Every door and drawer gets tested for smooth, quiet close before sign-off.

Materials

Materials and Methods for Hardware & Soft-Close Upgrades

  • Soft-Close Hinges photo

    Soft-Close Hinges

    These hinges cut down the slamming that's hard on hinge screws and cabinet frames over years of Florida humidity cycling the wood.

  • Soft-Close Drawer Slides photo

    Soft-Close Drawer Slides

    Drawers close gently instead of jolting shut, which matters on older boxes where repeated impact has loosened screws.

  • Modern Cabinet Pulls photo

    Modern Cabinet Pulls

    A pull swap updates the whole kitchen's look fast, a common ask on Lake Magdalene's original oak cabinetry.

  • Decorative Knobs photo

    Decorative Knobs

    Knobs add a personal touch without requiring any changes to the door or drawer front.

  • Hinge Mounting Plates photo

    Hinge Mounting Plates

    New mounting plates give a secure base on boxes where the original screw holes have worn loose.

  • Drawer Organizers photo

    Drawer Organizers

    Organizers get added at the same time as slide upgrades since the drawer's already pulled apart.

Timeline

How Long Does a Hardware & Soft-Close Upgrades Take?

  1. 01

    Stage 1

    Most hardware jobs are quick compared to a full refacing project, done in a single visit for a standard kitchen.

  2. 02

    Consult and hardware count

    same day
  3. 03

    Hardware ordering

    2–5 days

    for style and finish selection

  4. 04

    Install

    1 day

    for a full kitchen, half a day for a single room

  5. 05

    Function check

    same day

Need a schedule that fits?

Get a Free Estimate

Codes & permits

Permits and Codes for Hardware & Soft-Close Upgrades

Permit rules vary by job scope. Confirm specifics with Hillsborough County before work begins if you're combining this with structural changes.

Typically needs a permitOften no permit
No standard hardware or hinge upgrade requires a permit on its ownHinge replacement on existing doors
Work that adds electrical (lighted pullsDrawer slide replacement or soft-close conversion
under-cabinet wiring) may need an electrical permitKnob and pull swaps
—including re-drilling for different hole spacing
—Hinge mounting plate repair on existing boxes

Cost

What Does a Hardware & Soft-Close Upgrades Cost in Lake Magdalene?

Cost depends mostly on how many doors and drawers you're covering and whether you're matching a specific finish. These are ballpark ranges, not a locked quote. Get a free estimate and a specialist will give you a number based on your exact door and drawer count.

Project typeTypical rangeWhat’s included
Hardware-only swap$400–$1,200new knobs or pulls across a standard kitchen without hinge changes.
Soft-close hinge conversion$800–$2,000hinge replacement on all doors in a kitchen or large bathroom.
Full hardware and soft-close package$1,500–$3,500hinges, drawer slides, and new pulls across a full kitchen.
Single room or partial upgrade$200–$700hardware work limited to a vanity or a handful of cabinets.

These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.

Want a number for your home?

Get a Free Estimate

DIY vs pro

DIY vs Hiring a Pro for Hardware & Soft-Close Upgrades

DIYHire a Pro
Swapping a knob for a knob on the same holes is a reasonable weekend project with a screwdriver and a drill.Converting to soft-close hinges often means different cup sizes and mounting positions, and a misaligned hinge leaves doors that don't sit flush or close evenly.
Replacing a hinge with the exact same hinge type is manageable if the mounting holes line up.Drilling new pull holes on existing doors without a template risks visible mistakes you can't undo on a finished surface.

When to call

When to Call for Hardware & Soft-Close Upgrades

Call (727) 491-2967 or request a free estimate and we'll quote the hardware upgrade on its own or alongside a bigger refacing job.

  • Doors and drawers slam shut instead of closing smoothly.
  • Hinges squeak, sag, or no longer hold doors flush.
  • You're updating a kitchen's look on a budget without replacing doors or boxes.
  • Drawer slides stick, bind, or have come loose from the box.

FAQs

Hardware & Soft-Close Upgrades FAQs

Can I get soft-close hinges added during refacing?

Soft-close hinges and drawer slides are a standard add-on during any refacing job, and they can also be installed on their own without replacing doors or boxes.

Will new hardware fit my existing cabinet holes?

Sometimes. Pulls and knobs with matching hole spacing drop right in, but switching between a knob and a two-hole pull usually means drilling new holes or using a cover plate.

How long does a soft-close hinge conversion take?

A standard kitchen usually takes about a day, since each door gets a new hinge cup and the hardware needs testing for alignment.

Do soft-close hinges work on older cabinet boxes?

Yes. Older oak boxes common in Lake Magdalene take standard hinge hardware fine as long as the box itself isn't warped or damaged.

Is this a good standalone project or does it need to be part of a full refacing job?

It works fine as a standalone upgrade. A lot of homeowners do hardware first to see an immediate difference, then decide later whether to reface doors.

What's the difference between soft-close hinges and soft-close drawer slides?

Hinges control how doors close, slides control how drawers close. Most kitchens benefit from upgrading both since they wear out on a similar timeline.

Ask about Hardware & Soft-Close Upgrades

Tell us about the project and how to reach you.

Call (727) 491-2967