Lake Magdalene Cabinet Refacing logoLake Magdalene Cabinet RefacingLake Magdalene, FL
Menu
commercial cabinet refacing in Lake Magdalene, FL

Lake Magdalene Cabinet Refacing

Commercial Cabinet Refacing in Lake Magdalene, FL

Commercial cabinet refacing for offices and businesses in Lake Magdalene, FL. Durable materials, scheduled around your hours. Free estimates.

  • 15+ Years local experience
  • 500+ Projects completed
  • Licensed & Insured

Serving Lake Magdalene and nearby communities.

Break rooms, reception desks, and office kitchenettes take more daily abuse than a residential kitchen ever does, and the cabinetry in a lot of older Lake Magdalene area office buildings shows it. Commercial cabinet refacing updates that cabinetry with heavier-duty materials and hardware built for high-traffic use, scheduled around your business hours instead of a standard residential timeline. Lake Magdalene Cabinet Refacing works directly with property managers and business owners to plan the job with minimal disruption to daily operations.

What's included

What's Included with Commercial Cabinet Refacing

Typically included: site evaluation of existing commercial cabinetry, commercial-grade material selection, box prep and surface resurfacing, door and hardware replacement, post-install inspection for durability compliance.

Optional: antimicrobial surface coating for break rooms and medical offices, after-hours or weekend scheduling, phased installation across multiple rooms or floors to keep part of the space operational.

Customer prep: clear cabinet contents and provide after-hours access or a scheduling window if work needs to happen outside business hours.

How it works

How Our Commercial Cabinet Refacing Process Works

  1. Site Evaluation photo
    Step 1

    Site Evaluation

    Existing cabinetry is assessed against daily operational use.

  2. Scheduling Coordination photo
    Step 2

    Scheduling Coordination

    Work gets scheduled around business hours to limit disruption.

  3. Durable Material Selection photo
    Step 3

    Durable Material Selection

    Commercial-grade laminate and hardware are chosen for traffic levels.

  4. Box and Surface Prep photo
    Step 4

    Box and Surface Prep

    Cabinet boxes are prepped to handle frequent commercial use.

  5. Refacing Installation photo
    Step 5

    Refacing Installation

    New surfaces, doors, and hardware go in across the space.

  6. Compliance Check photo
    Step 6

    Compliance Check

    Finished work is reviewed against commercial durability standards.

Materials

Materials and Methods for Commercial Cabinet Refacing

  • Commercial-Grade Laminate photo

    Commercial-Grade Laminate

    Heavy-duty laminate resists the scuffs and repeated contact that residential-grade surfaces wear through fast.

  • Reinforced Hinges photo

    Reinforced Hinges

    Reinforced hardware holds up to the higher open-close frequency of a shared break room or reception cabinet.

  • Impact-Resistant Panels photo

    Impact-Resistant Panels

    Panels stand up to carts, equipment, and foot traffic common in office and retail settings.

  • Heavy-Duty Drawer Slides photo

    Heavy-Duty Drawer Slides

    Slides rated for frequent, repeated use outlast standard residential slides in a shared-use environment.

  • Antimicrobial Surface Coating photo

    Antimicrobial Surface Coating

    A coating option that helps reduce surface bacteria buildup, useful for break rooms and medical office cabinetry.

  • Commercial Hardware Sets photo

    Commercial Hardware Sets

    Pulls and hinges built for long-term commercial performance rather than light residential duty.

Timeline

How Long Does a Commercial Cabinet Refacing Take?

  1. 01

    Stage 1

    Timeline depends heavily on scheduling constraints since most commercial jobs run around business hours rather than straight through.

Need a schedule that fits?

Get a Free Estimate

Codes & permits

Permits and Codes for Commercial Cabinet Refacing

Commercial projects often fall under different code review than residential work. Confirm permit requirements with Hillsborough County and your building management before scheduling.

Typically needs a permitOften no permit
Any work involving plumbing or electrical changes in a break room or shared kitchenetteDoor
Structural modifications to walls or built-in cabinetry supportsdrawer front
Projects in buildings subject to ADA or occupancy code review for cabinet height and clearanceveneer surface replacement on existing boxes
—Hardware upgrades including hinges and drawer slides
—Surface resurfacing without plumbing or electrical work
—Crown molding or trim additions above existing cabinet runs

Cost

What Does a Commercial Cabinet Refacing Cost in Lake Magdalene?

Cost scales with square footage, material grade, and scheduling complexity more than a typical residential job. These are honest ballpark ranges. Request a free estimate and we'll scope your space and schedule.

Project typeTypical rangeWhat’s included
Single break room or kitchenette$2,000–$6,000doors, surfaces, and hardware for one room.
Reception or lobby cabinetry$3,000–$8,000higher-visibility finish work with commercial-grade materials.
Multi-room office buildout$8,000–$25,000+several rooms refaced with phased scheduling.

These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.

Want a number for your home?

Get a Free Estimate

DIY vs pro

DIY vs Hiring a Pro for Commercial Cabinet Refacing

DIYHire a Pro
A small single break room with low traffic might be manageable for a handy facilities team using standard residential materials.Commercial spaces need materials and hardware rated for higher use cycles than residential-grade products, and getting that durability wrong means redoing the job within a year or two instead of a decade.

When to call

When to Call for Commercial Cabinet Refacing

Call (727) 491-2967 or request a free estimate to scope your commercial space and scheduling needs.

  • Break room or kitchenette cabinets show heavy wear, peeling, or damaged hardware.
  • You're updating office or retail space appearance for tenants or clients.
  • Standard residential-grade cabinetry has worn out faster than expected under daily business use.
  • You need work scheduled around business hours or tenant occupancy.

FAQs

Commercial Cabinet Refacing FAQs

How is commercial refacing different from residential refacing?

Commercial jobs use heavier-duty materials and hardware rated for higher traffic, and scheduling is built around business hours instead of a standard residential timeline.

Can you work around our business hours?

After-hours and weekend scheduling is available for an added cost, and phased installation keeps part of the space operational during the project.

What materials hold up best in a shared office kitchen?

Commercial-grade laminate and reinforced hardware handle frequent use better than standard residential-grade materials.

How long does a multi-room commercial project take?

A multi-room buildout typically runs several weeks when phased scheduling and commercial material lead times are factored in.

Do commercial cabinet projects need a permit?

Most surface and hardware refacing work doesn't require a permit, but any plumbing, electrical, or structural work tied to the project likely does.

Can antimicrobial coating be added to any commercial project?

It's an optional add-on available for break rooms, medical offices, or any space where surface hygiene is a priority.

Ask about Commercial Cabinet Refacing

Tell us about the project and how to reach you.

Call (727) 491-2967