
Lake Magdalene Cabinet Refacing
Cabinet Refacing in Lake Magdalene, FL
Cabinet refacing in Lake Magdalene, new doors, veneer skins, and hardware over your existing boxes, free estimates available.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Lake Magdalene and nearby communities.
Oak boxes still square and solid, but the doors look stuck in 1985? That's the call Lake Magdalene Cabinet Refacing gets most. Tearing a kitchen down to studs is expensive and slow, and most of the time it isn't necessary.
Refacing keeps your existing cabinet boxes in place. New door fronts, matching veneer skins, and updated hardware go on top. The result reads as a new kitchen at a fraction of a full remodel's cost and mess, and it works well on the original 1970s-90s oak boxes common across Lake Magdalene.
What's included
What's Included with Cabinet Refacing
Typically included
- Removal of old doors, drawer fronts, and exposed hinges
- Veneer skins applied to cabinet box faces and end panels
- New doors and drawer fronts matched to your chosen style
- Hardware install, pulls, knobs, hinges
Optional
- Soft-close hinge and slide upgrades
- Crown molding added to cabinet tops
- Interior organizers or pull-out trays
Customer prep
- Clear countertops and cabinet contents before the crew arrives
- Confirm color and door style selections ahead of the install date
Want a clearer scope?
Get a Free EstimateHow it works
How Our Cabinet Refacing Process Works
Step 1Cabinet Assessment
Existing cabinet boxes are inspected for structural soundness before refacing begins.
Step 2Design Consultation
Clients review finish and style samples to plan the new cabinet appearance.
Step 3Box Preparation
Surfaces are cleaned and lightly sanded to help new materials adhere properly.
Step 4Veneer Application
Matching veneer is applied to exposed cabinet surfaces for a smooth finish.
Step 5New Door Fitting
Replacement doors and drawer fronts are installed to complete the updated look.
Step 6Quality Check
Each cabinet is inspected for proper alignment, finish consistency, and smooth operation.
Materials
Materials and Methods for Cabinet Refacing
Humidity is the enemy of cheap adhesives. The materials below are picked to hold up in Hillsborough County's year-round moisture, not just look good on install day.

Rigid Thermofoil
A durable foil finish wraps cabinet surfaces for a smooth, consistent appearance that resists the seam-peeling common on older Lake Magdalene laminate kitchens.

Wood Veneer
Natural wood veneer offers an authentic grain look over existing cabinet boxes, a good match for original oak builds still structurally sound.

Adhesive Bonding Agents
Professional-grade adhesives ensure veneer and laminate stay securely bonded long-term, even with AC cycling and summer humidity swings.

Matching Drawer Fronts
New fronts are crafted to match replacement doors for a unified design across the whole kitchen.

Edge Banding
Edge banding finishes exposed panel edges for a clean, professional look that won't lift at the corners.

Cabinet Hardware Sets
Coordinated hardware sets complete the refaced cabinetry with a polished finish.
Questions on materials?
Get a Free EstimateCost
What Does a Cabinet Refacing Cost in Lake Magdalene?
Price depends mostly on door count, material choice, and whether hardware gets upgraded. These are honest starting ranges, not a locked quote for your kitchen. Request a free estimate and we'll measure your kitchen in person before quoting a number.
| Project type | Typical range | What’s included |
|---|---|---|
| Door-only upgrades | $3,000–$6,500 | new fronts and hardware on boxes in good shape. |
| Standard kitchen refacing | $6,500–$14,000 | full box veneer, new doors, drawer fronts, hardware. |
| Full refacing with upgrades | $14,000–$22,000 | soft-close hardware, crown molding, custom sizing. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateCodes & permits
Permits and Codes for Cabinet Refacing
Standard refacing jobs with no plumbing, electrical, or structural work generally skip a permit under Hillsborough County guidance. Confirm specifics with the county before work starts.
| Typically needs a permit | Often no permit |
|---|---|
| Moving or adding plumbing lines behind the sink base | Replacing doors |
| Rewiring or relocating under-cabinet electrical outlets | drawer fronts |
| Removing or altering a structural wall or soffit | veneer on existing boxes |
| — | Swapping hinges |
| — | pulls |
| — | knobs |
| — | Adding crown molding to the top of a cabinet run |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs Hiring a Pro for Cabinet Refacing
| DIY | Hire a pro |
|---|---|
| Fine for swapping a knob or two on boxes you're not reselling the look of | Box assessment catches swelling or square issues before material goes on |
| Door-kit alignment gets tricky fast on older, slightly out-of-square boxes | Climate-rated adhesives and veneer get matched to your kitchen's exposure |
| Humidity-sensitive adhesives can lift within months if applied wrong | Measuring and door ordering account for Lake Magdalene's older, non-standard cabinet sizes |
Not sure DIY vs pro?
Get a Free EstimateBefore & after
Before and After Cabinet Refacing

Before 
After
FAQs
Cabinet Refacing FAQs
How can I refinish my cabinets without sanding or stripping them?
Deglosser and bonding primer systems let new finish adhere without full sanding, though heavy stripping is sometimes still needed on failing lacquer. Refacing sidesteps this entirely by covering the box with new veneer instead of refinishing the old surface.
How can I tell if my cabinets are laminate or veneer?
Laminate has a flat, consistent pattern with visible seams at edges, while veneer shows real wood grain that varies slightly piece to piece. A close look at a door edge usually settles it.
What kitchen cabinet colors will look outdated in 2026?
Heavy honey-oak stains and high-gloss all-white finishes are starting to read dated. Warmer neutrals and mixed-tone finishes are holding up better right now.
Can laminate cabinets be resurfaced?
Yes. Peeling sections get removed and the box gets a new veneer or laminate skin rather than a patch over the old layer.
Is cabinet refacing worth it compared to full replacement?
When the boxes are square and solid, refacing usually costs less and takes less time than a full teardown, with a similar visual result.
Do I need a permit for Cabinet Refacing?
Standard refacing with no plumbing, electrical, or structural wall changes generally doesn't require a permit under Hillsborough County guidance. Verify with the county if your project is more involved.
How long does Cabinet Refacing take?
A standard kitchen typically runs from a same-day consult through a few days of install, once materials arrive.
Is DIY Cabinet Refacing a good idea?
For a single door or drawer front, maybe. For a full kitchen, misaligned doors and lifted adhesive are common DIY outcomes that a pro avoids.
Next step
Get a Cabinet Refacing Estimate in Lake Magdalene
Call (727) 491-2967 or request a free estimate and we'll walk your kitchen before quoting anything. Home | Contact | Kitchen Cabinet Refacing
More services
Other Cabinet Refacing services

Kitchen Cabinet Refacing
Kitchen cabinet refacing in Lake Magdalene, FL. New doors, veneer, and hardware over your existing boxes. Free estimates.

Bathroom Vanity Refacing
Bathroom vanity refacing in Lake Magdalene, moisture-resistant doors and veneer for humid bathrooms, free estimates.

Cabinet Door Replacement
Cabinet door replacement in Lake Magdalene, FL. New doors and drawer fronts on your existing boxes. Free estimates, no mess.
Ask about Cabinet Refacing
Tell us about the project and how to reach you.