
Lake Magdalene Cabinet Refacing
Crown Molding Addition in Lake Magdalene, FL
Crown molding installed above kitchen cabinets in Lake Magdalene, FL. Finish your refacing project with a built-in look. Free estimates.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Lake Magdalene and nearby communities.
A lot of original kitchens in Lake Magdalene's built-out neighborhoods skipped crown molding above the cabinets entirely, leaving a gap between the cabinet top and the ceiling or soffit that reads as unfinished. Crown molding addition closes that gap with a profile that matches or complements new cabinet doors, whether it's part of a full refacing job or a standalone finishing touch on cabinets you're keeping.
Lake Magdalene Cabinet Refacing cuts and fits molding to your actual ceiling line, not a generic straight run.
What's included
What's Included with Crown Molding Addition
Typically included: measurement of cabinet tops and corner angles, molding profile selection, cutting and mitering corners, installation and attachment to cabinet tops, finish matching to existing or new cabinetry.
Optional: lighted cove detail behind the molding, extending molding across adjacent soffits, staining or painting molding to match a different finish than the cabinet doors.
Customer prep: clear counter space below the cabinet runs so the crew has room to work and stage molding pieces during cutting and fitting.
Want a clearer scope?
Get a Free EstimateHow it works
How Our Crown Molding Addition Process Works
Step 1Space Measurement
Cabinet tops are measured for molding length and corner angles.
Step 2Molding Style Selection
Homeowners choose a profile that fits their cabinet design.
Step 3Cutting and Fitting
Pieces are cut to precise angles for clean corner joints.
Step 4Surface Preparation
Cabinet tops are prepped so molding attaches securely.
Step 5Molding Installation
Molding is set and fastened along the cabinet run tops.
Step 6Finish Touch-Ups
Seams and nail holes are filled and finished to blend with the cabinetry.
Materials
Materials and Methods for Crown Molding Addition

Crown Molding Profiles
A range of standard and decorative profiles gives options that read as original to the cabinetry rather than an add-on.

Wood Molding Strips
Solid wood holds up well in Lake Magdalene's humidity swings without the warping that can affect lower-grade composite trim.

Molding Adhesive
Construction adhesive backs up the mechanical fasteners for a secure bond on cabinet tops.

Finish Nails
Nails give the molding extra holding strength at corners and seams where adhesive alone can shift over time.

Matching Stain or Paint
Finish is color-matched to the cabinet doors so the molding reads as part of the original build.

Corner Molding Blocks
Pre-formed corner blocks simplify tricky angles on kitchens with non-standard cabinet layouts.
Questions on materials?
Get a Free EstimateTimeline
How Long Does a Crown Molding Addition Take?
- 01
Stage 1
Crown molding is usually a short add-on job, especially when paired with a refacing project already underway.
- 02
Measure and plan
same day - 03
Molding fabrication or order
3–7 daysfor custom profiles
- 04
Install
1 dayfor a standard kitchen run
- 05
Finish touch-up
same day
Need a schedule that fits?
Get a Free EstimateCodes & permits
Permits and Codes for Crown Molding Addition
Confirm with Hillsborough County if your molding addition involves any ceiling or soffit modification beyond the cabinet top itself.
| Typically needs a permit | Often no permit |
|---|---|
| No standard crown molding addition above existing cabinets requires a permit | Molding attached directly to the tops of existing cabinet boxes |
| Work tied to ceiling or soffit structural changes would need separate review | Molding extended onto adjacent wall surfaces without structural changes |
| — | Corner block installation at cabinet runs |
| — | Paint or stain finishing on installed molding |
Need help with permits?
Get a Free EstimateCost
What Does a Crown Molding Addition Cost in Lake Magdalene?
Cost depends on molding profile, cabinet run length, and whether corners need custom mitering. These are honest starting ranges, not a fixed price. Get a free estimate and we'll quote your exact cabinet layout.
| Project type | Typical range | What’s included |
|---|---|---|
| Single cabinet run | $200–$600 | molding above one wall of cabinets with simple corners. |
| Full kitchen molding | $600–$1,800 | molding across all cabinet runs with matching finish. |
| Custom profile or detailed trim | $1,200–$2,800 | decorative profiles with built-up layers or lighted cove detail. |
| Paired with a refacing project | $400–$1,000 | Add to your refacing quote, since boxes are already staged for finish work. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateDIY vs pro
DIY vs Hiring a Pro for Crown Molding Addition
| DIY | Hire a Pro |
|---|---|
| A short, straight run with square corners is a doable DIY project if you have a miter saw and patience for test cuts. | Most kitchens have cabinet runs that aren't perfectly square to the ceiling, and a mitered corner cut without adjusting for that gap shows a visible seam that's hard to fix after the fact. |
| Pre-formed corner blocks make DIY corners more forgiving for a beginner. | — |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to Call for Crown Molding Addition
Call (727) 491-2967 to get a free estimate on crown molding for your kitchen or bathroom cabinets.
- Your cabinets stop short of the ceiling with an awkward gap above them.
- You're refacing cabinets and want a finished, built-in look to match.
- Existing molding is damaged, outdated, or doesn't match new cabinet doors.
- You want to update a kitchen's look without touching the cabinet boxes themselves.
Seeing warning signs?
Get a Free EstimateFAQs
Crown Molding Addition FAQs
Is crown molding worth adding during a refacing project?
Most homeowners add it at the same time as refacing since the crew is already on site and the cost is lower than a standalone job later.
Will the molding match my new cabinet doors?
Profiles and finishes are selected to match or complement whatever door style and color you choose for the refacing.
How long does crown molding installation take?
A standard kitchen run usually installs in a day, with another few days of lead time if you're ordering a custom profile.
Can molding be added to cabinets I'm not refacing?
Crown molding addition works as a standalone service on cabinets you're keeping as-is.
What if my ceiling isn't level?
That's common in older homes. Corners and cuts get adjusted during fitting so the molding sits flush even when the ceiling line isn't perfectly straight.
Does crown molding need to be painted after install?
If it's pre-finished to match your cabinets, no. Unfinished wood molding gets stained or painted on site to match.
More services
Other Cabinet Refacing services

Cabinet Refacing
Cabinet refacing in Lake Magdalene, new doors, veneer skins, and hardware over your existing boxes, free estimates available.

Kitchen Cabinet Refacing
Kitchen cabinet refacing in Lake Magdalene, FL. New doors, veneer, and hardware over your existing boxes. Free estimates.

Bathroom Vanity Refacing
Bathroom vanity refacing in Lake Magdalene, moisture-resistant doors and veneer for humid bathrooms, free estimates.
Ask about Crown Molding Addition
Tell us about the project and how to reach you.